10610573_10205710672826846_8608027919857727933_n

Cobra! Photo Alan Johnson

Just in case you have been living in a bilge for the past 6 months, you may not know that this years specialness at lake Dora is the 60th Anniversary of the Cobra. And today we have the list from Terry Fiest of all the Cobras showing up. This will be a once in a lifetime event.

cobra 666 Alan

Alan doing his thing!

If you drool over these amazing Cobra models, this show is a MUST ATTEND! If you like laughing, woody boating, having fun in the sun, and a cold beer at night, well….. why are you not already on the road?

cobra 111

 

Today’s header, note the absolute perfection! All the screws are lined up, the bungs perfect, paint, varnish. the entire boat is like this! Courtesy -Katzs Marina

 

 

cobra 222 cobra 333
Cobra 666

Slide in and lets go Woody Cobra boating

cobra 555

The photos today are from the preparation at Katz’s Marina from Bob Kays, and Alen Johnson lettering. Here is the list.

LIST OF COBRA OWNERS AND BOATS THAT ARE PLANNING TO ATTEND THE 60TH ANNIVERSARY COBRA CELEBRATION AT THE 28TH ANNUAL SUNNYLAND ANTIQUE BOAT FESTIVAL

SETH KATZ——-BR-21-017—–BR-21-055—–BR-18-032—land display and access to launch as needed

FRANK BAUER—–BR-21-030—water

STEVE MARINI—-BR-21-021—water

BOB BOARDMAN—BR-18-011—water

JACK GOULD—–BR-18-002—land

LARRY COX—-BR-18-003—Land or water

STEVE WINDOM—-BR-21-006—–BR-18-010—one in water and one on land

DAN DIEHL—BR-21-012—water

PETE BEAUREGARD—-BR21-033—-water

CLARK SMITH—BR-21-045—-BR-18-024—-both on land

JOHN MURPHY—BR-21-014—-water

 

Just 8 more days til we start having fun!

You might like...
« « Previous Post         |         Next Post » »
22 Responses to “Cobra Cobra. The Official List Of All 15 Cobras To Be At Lake Dora”
  1. Troy in ANE

    This is going to be AWESOME!

    I wish at least one of the Cobbossee Cobras was making the trip.
    Still a lot of snow up here.

  2. Dennis Mykols

    Getting packed up today, leaving Friday am. Heading to Charleston S.C. for a couple of days with my son and his family, and do some boatin. See you all Thursday afternoon, for the big party.
    No boat this year, looking for a boat ride or two, hint, hint…

  3. Wilson

    Impressive list…Looking forward to seeing Clark Smith there…Haven’t seen him in some time…
    Clark…did you ever find that elusive Cobra you spotted sitting between two junked cars ?..See you there.

    Terry: You convince that guy in Sarasota to take his Cobra out of the car museum for a day or two ?

  4. floyd r turbo

    A couple of years ago my 19 yr old son was delivering a customers car from Atlanta to Long Lake, Maine when he stopped at a rest area in Penn, or NY where he noticed a fully covered woody and asked the driver?/owner? where they were headed with the 21′ Cobra. They were amazed he could figure it out being fully covered. Not amazing to us w/b’ers. We think its the one in Cobbossee Troy, they were headed to Maine.

    • Troy in ANE

      I think that was Guy and Connie. They are actually looking for a place on a lake (maybe Cobbossee) but last I knew she was on a trailer.

  5. Terry Fiest

    The Cobra in the museum in Sarasota is BR-18-001. I have been talking to him and he is actually trying to sell it. It was at an auction last week and didn’t sell. Its headed down to south Florida the end of the month for another attempt to auction it off.

  6. K-Cro

    I love so many Chris Crafts, from many decades, but I gotta say, I have always found the Cobra to be U-G-L-Y, “it ain’t got no albi…it’s UGLY!” I know the late ’50s were an especially fins, fins, fins and more fins era, and that combined with “hey-what-about-adding-fiberglass-too?,” a boat like the Cobra results. But honestly, I’d take any 1930’s-1960’s barrel back, sportsman, or runabout over a Cobra, 8 days a week.

    • m-fine

      I have always wondered about the Cobra appeal. It is not just that the fiberglass hull is on the wrong side, or the big fin, I find the various lines and curves of the boat to look more like a hodge podge design by committee rather than a uniform piece of art. It is easily my least favorite of the runabouts, yet they remain popular and fan favorites and obviously hold a good value in the marketplace. Anyway, you are not alone, but we definitely seem to be a minority.

      So, what is the feature boat for next year? Give us some lead time so maybe I can buy one and restore it in time 🙂

  7. mark edmonson

    hidden in the Thumb of Michigan is 21′ Hull#001 “Cobra One” on the hullsides, with a caddy V-8. The boat is perrrfect!! I saw her a few years ago when I work on the owners 18′ cobra hull # 003 or 007 can’t remember.

  8. CDA Duck

    Are all the Cobra’s that were manufactured accounted for, or are there more to be found?

  9. Hugger69

    Extremly nice restorations, we’ve have never seen these Cobras here in Sweden!
    I’m just curious regarding the screws….here in Sweden Philips screws are like “forbidden” on classic wooden boats! We use the slotted ones in every place that are seen at least!
    What did the Cobras have from the beginning?

    • Mike Green

      Chris Craft used straight slot screws until WW II then they switched to phillips head screws. I did see an untouched 16’barrel back from 1941 that had both in it but not certain that was the transition year. Century used primarily straight slot screws. I know that large boat companies also used straight slots, they used large screws in the decks to hold down cleats and other hardware and did not want water sitting in the top of the screw which would happen if it was a large phillips.

  10. Lottawood

    Frearson, to be more specific was the name of the recess,they were manufactured by The Reed & Prince Co.,just saying.

  11. Cobourg Kid

    I had presumed that the new owner of Peter Bailey’s former Cobra (Hull No. BR18-020) would show up at the Dora Cobra Fest. 🙁

    Back in the day Peter exercised the old girl wherever and whenever possible.

  12. Steve Anderson

    It is interesting that only 9 are listed in the Hull Registry in the Chris Craft club, and hull BR-18-045 is listed twice there. Can someone take down the pertinent information next week and get them all in the registry?

    Also, for the record, I LOVE the look of the Cobra’s, and have always coveted them since I first saw a picture of one as a kid. One is for sale, does anyone know the asking price?

  13. Walt

    For those of us who don’t have the Ovaltine Chris Craft decoder ring, what do the letters and numbers signify?

  14. Cobourg Kid

    Walt I believe the 18 signifies the 18 foot model and the 21 indicates the 21 foot model the number after the hyphen on both boats indicates the sequence that each boat was built on for example 18 – o20 would be the 20th 18 footer built in standard production run. I believe that there were a couple demonstrators built first so hull number is not 100 percent accurate

  15. George Burgess

    Each Size Cobra(18 or 21) had a Prototype, the designation is BR18-00P and BR21-00P. The numbers continue with 001 etc. So there are a total of 52 18ft. Cobra’s and 56 21ft. Cobra’s.